LED Lighting Potting Materials


Characteristic:

  • Has excellent electric resistance and thermal conductivity.
  • Has moisture resistance, shock proof.
  • It could make the electronic components work well on the rigorous conditions.
  • Low viscosity.
  • Ratio: 10:1.

Application:

TCS-200: Used for electrical and electronics encapsulating, moisture proof and coating of circuit board, encapsulating of LED displays used in indoor or outdoor, encapsulating of LED traffic signal, hard light bar, etc. This product could protect and seal them.

TCR-288: Used for potting of variety of electric components, such as encapsulating of outdoor LED lighting, soft light bar, etc.

TCR-210: Used for potting of variety of electric components, encapsulating of outdoor lighting, such as Washing-wall light, throw light, shoot lamp, ground bury lamp and other outdoor lighting.

 

Specification for this Item:

ITEM TCR-200 TCR-288 TCR-210
Before

Vulcanize

ation

Appearance Colorless transparent Liquid White/Black Liquid
Viscosity /mPa-s 1000-1400 4500-6500 1500-2200
Operation time (25°C)/ min ≥120 40-60 40-80
Hardness / Shoes A 10-16 6-12 9-15
After

Vulcanize

ation

Density / g-cm-3 0.98±0.02 1.00±0.02 1.20±0.02
Volume resistivity

/Ω-cm

1.0×1013 1.0×1013 1.0×1013 

Package:

Silicone rubber: 10KG/Drum; Curing agent : 2KG/Bottle.

Note:

At room temperature (25°C), the viscosity will increase with the time. So the mixing should start when you need it, and it must you need it, and it must be used up in a short time.

Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LED Lighting Potting Materials”

There are no reviews yet.