ESD Flooring Solutions, ESD Products
ESD Epoxy Flooring
Through surface preparation is a must for best results
I.e. surface preparation is the key to durability of
Coatings. It should be ensured that the surface on which
The primer is going to be applied is rough in nature.
The concrete must be made clean, dry and free of any
Oil, grease or other bond breaking contamination. CDS
(Clean, Dry and Sound) test is to be conducted on the
It is also of prime importance that the substrate shall not
Suffer from rising dampness of moisture content more
than 5%. Moisture test is conducted by moisture meter
Or plastic sheet method (ASTM D4263: Standard test
method for indicating moisture in concrete).
Surface preparation like s grinding etc is done to achieve
a surface profile of 150-200 microns.
- GROOVE CUTTING & FILLING :
The groove is cut manually and cleaned properly for removal of dust. The cleaned grooves are filled in with our filling material.
Primer coat is a thin mild coating which penetrates into the
concrete and forms and cohesive bond. Primer provides excellent adhesion to the concrete /cementitious substrates.
Epoxy based primer is applied on the prepared surface,
Which is solvent less, low viscous, two components? Epoxy.
EPU screed consist of 3 parts i.e. resin, hardener and the
aggregates, which gives maximum strength and protection to the coatings.
Epoxy: Epoxy self leveling flooring is a four
Component self leveling system based on pure liquid Epoxy resin cured with a special grade of cyclo Aliphatic amine.