Anti-Static Mats
Dualmat™
Static Dissipative Mat
DualmatTM is a 2-ply chemically cross-linked rubber material that is inherently dissipative on the top side and conductive on the bottom side. The material will not exudate, outgas, or lose its electrical properties. The soft textured surface offers comfortable protection against static discharge, parts slippage, and damage from UV lights. The durable material is resistant against solder, heat, and most common solvents.
- Surface resistivity measures 106 – 108 ohms per square
- Electricals are warranted for the lifetime of the mat.
- Compliant to ANSI / ESDA S20.20. Two ply .080″ (2mm) thickness. Static decay of .05 seconds. Embossed surface.
- Low outgassing; low VOC. UV additives provide color stability.
- Available in four colors: light blue, dark gray, royal blue, and green.
- Rolls available in lengths of 40′ and widths of 24″, 30″, 36″ and 48″. Precut mats include two 10mm female snaps. Custom cut sizes available.
Gemini
Dual-layer Static Dissipative Material
Gemini static dissipative work surface material is a 2-layer thermoplastic vinyl that is inherently dissipative on the top side and conductive on the bottom side. Made in the USA, this material offers high value at a lower cost. The electrical properties are consistent and are warrantied.
- Resistance of colored top layer measures 106 – 108 ohms as per ANSI/ESD S4.1
- Resistance of black bottom layer measures less than 106 ohms as per ANSI/ESD S4.1
- Electricals are warranted for the lifetime of the mat.
- Compliant to ANSI / ESDA S20.20. Two ply .065″ (1.65mm) thickness.
- Static decay of .05 seconds. Embossed surface. Low outgassing; low VOC. UV additives provide color stability.
- Recyclable. Available in two colors: light gray and royal blue
- Rolls available in lengths of 50′ and widths of 24″, 30″, and 36″. Precut mats include two 10mm female snaps
- Custom cut sizes available.
SpecMat-H
Homogeneous Static Dissipative Material
SpecMat-H static dissipative homogeneous work surface is a single-layer, ESD-safe, thermoplastic vinyl that is inherently dissipative throughout. Made in the USA, this material offers high value at a lower cost.
- Resistance measures 108 – 109 ohms according to ANSI/ESD S4.1.
- Electricals are warranted for the lifetime of the mat.
- Compliant to ANSI / ESDA S20.20.
- Single layer: two thicknesses available (0.10″ & 0.06″).
- Static decay of .05 seconds. Embossed surface.
- Low outgassing; low VOC. UV additives provide color stability.
- Recyclable. Rolls available in lengths of 40′ and widths of 24″, 30″, and 36″.
- Precut mats include two 10mm female snaps. Custom cut sizes available.
There are no reviews yet.